Product Show
Two electrician copper flat wire
Primary parameter
Products introduction: Electrician copper flat wire is made of oxygen-free copper rod which is extruded or drawn through the die by different specification. electrician copper flat wire can be used as a finished product, can also be an intermediate product, widely used in motors, transformers , Reactors and other similar electrical equipment.
Details
●Products introduction: Electrician copper flat wire is made of oxygen-free copper rod which is extruded or drawn through the die by different specification. electrician copper flat wire can be used as a finished product, can also be an intermediate product, widely used in motors, transformers , Reactors and other similar electrical equipment.
●Standard：GB5584.2-2009
●Production range：
Narrow side a:0.90mm—5.60mm
Wide side b:2.00mm—16.00mm
If the specifications beyond the above range, please contact us
●Raw Material：
The resistivity of copper flat wire can not be more than 0.017241Ωmm2 / m in 20 ℃.
Tensile strength and elongation of copper flat wire shall comply with the following table:
The size of copper flat wire narrow side a and wide side b shall comply with the following table
Copper flat wire R angle should meet the following requirements
